The Nozzle Diam options only open for BOX, BOX+,UP300,X5 Cetus printer and some other models coming up. For the following printers, UP mini 2, UP mini 2 ES, UP Plus 2 and etc, the nozzle diameter is set to 0.4mm, and you can not change it.
The options for Layer Thickness can also be changed if the nozzle diam is changed. Check the Layer Thickness settings before starting a print.
如何改变喷嘴直径:
Open UP Studio software on your computer, clickUP左边的side menu, clickMaintenance, and then findNozzle Diamto change the settings to the desired value.
Comments
0 comments
Pleasesign into leave a comment.