Hi MoAH，
通过增加/减小挤出宽度来控制侧壁的厚度。单击upstudio中的“打印”按钮，然后单击左上角的箭头图标打开额外设置。
安装喷嘴并设置喷嘴的尺寸，并将下一个upstudio，下一个设置提供是层高度。Upstudio为每层高度提供预先配置的挤压宽度（侧壁厚度），用于喷嘴的每个层高度。So when you click on different layer heights you’ll notice the extrusion-width will also change.
You may change the extrusion-width for a given layer-height, but if you choose a width too far from the recommended width you will notice the print-quality degrades. Using a different slicer will allow for fine-tuning the print settings.
cheers,
Brent
