#1

The printer is really loud. Even when not printing.

It would be nice to be able to control the volume of the speaker/horn. It is incredibly loud.

It woul be nice if the cooling fan turned off when the printing is done. If my print finishes in the middle of the night, all the family still has to listen to the racket for the rest of the night.

#2

Hey

You could try a bigger fan. I use a 60mm fan from Noctu and it’s realy quiet. For more info look here:

https://www.cetus3d.com/forums/topic/technical-specs-of-the-cetus-3d-fan-blower/

And for the speaker you can print a cover. For more info look here:

https://www.cetus3d.com/forums/topic/please-allow-us-to-turn-off-the-beeping/

#3

An option to disable the motors (like after power on but before initialisation) after the print is finished would be awesome.

@ MadMixer
I thought about the Noctua Fan. But even more moving mass on the extruder results in higher inertia and can decrease the surface quality when printing fast.
Like this Examplehttps://www.thingiverse.com/thing:277394

So i decided to keep the small one…