＃1

我经历了0.6毫米喷嘴的问题。似乎进给率未正确调整，以便零件未正确打印。我在论坛之前已经读过这个问题，但不能再找到线程。

＃2

Hello

您是否尝试提高挤出温度一点（〜+ 5°C）以便于通过0.6mm喷嘴诱导增加的材料流量诱导α

Also, you should go into material parameters, where you could artificially downsize the material real diameter (e.g.; to enter 1.65 instead of 1.75mm) to make printer software to react accordingly.

I’m not a specialist into this, but above mentioned are from my short experience into 0.6mm extrusion on Cetus 3D MK II

Hope it could help anyway…

＃3

没有找到改变Cetus 3D软件中的材料厚度的选项。