使用仅9个定点校准和0.1mm精度，很难得到床的校准。< / p >
If the nozzle gets blocked on the first layer, the extruder is overpowering and literally forces the carriage to deflect (which also moves the print head).
Please turn down the max current on the extruder. Can we set this using G-code? I haven’t tried yet.
The extruder really needs to skip steps, instead of blindly overpowering the problem.
Here’s video showing problem
https://lionoxmaneagle.tumblr.com/post/176144771359< / p >< / p >
