所以我有一些喂丝（柔性/碳填充）要么就根本不喂Flex和碳丝需要更多的夹紧力的问题。缩回还造成长丝研磨。拆卸挤出机后，检查它可以看到它真的只为惰轮固定有一套夹紧压力。
So initially tried a part of thingiverse which worked reasonably well… but then went whole hog and made this with a BMG clone extruder, custom clamp and tried to use the UPBOX heater element components but it wouldn’t feed reliably as filament was too hot and soft going into the UPBOX heater throat. (this is why the BMG was cut across the bottom to try and use the original parts). Change the heater block completley but re-used the upbox parts in the end and now it works great. Note the UPBOX uses PTC thermistors (resistance increase with temp)… i tried common aftermarket thermistor but the are NTC type and it read 320 degrees at ambient LOL!.
那里有你需要做的像反转步进电机方向几件事情（可通过在连接器端至头部PCB交换两个导线容易地完成），比例为BMG具有以3:1的比例的显著向上流动：1。周围有点CHANE球迷。但是，它的工作原理治疗和如果感兴趣的话可以把更多的信息。理想情况下，你需要使用CURA MOD香港专业教育学院做（文件是在这个论坛上，让中城联盟来生成可使用UP Studio中传输的UP完全兼容GCODE）作为它的唯一的方式来改变流动等显著，因为没有访问固件。
